Clutch Housing Assemble

Clutch Housing Assemble

Tools Required

* 83 90 114 Sleeve
* 83 90 312 Drift, Bearing Race Input Shaft
* 87 91 220 Drift, Main Shift Rod Bushing
* 87 91 311 Sleeve, Bearing Driver Shaft
* 87 92 210 Support, Differential Bearing
* 87 92 236 Support
* SA9113T Axle Seal Installer
* SA9172G Ball Detent Handle




1. Press in the new differential bearing race using the SA9113T and the SA9172G. Use the 87 92 236 as a base for the pressing operation.




2. Install the new axle using the SA9113T and SA9172G.




3. Press in the new input shaft bearing race using the 83 90 312. Use the 83 90 114 and the 87 91 311 as a base for the pressing operation.