Transaxle Case Disassemble

Transaxle Case Disassemble

Tools Required

* 87 90 800 Drift, Differential Seal
* 87 91 311 Bearing Driver Shaft Sleeve
* 87 92 236 Support




1. Remove the input shaft bearing retainer screws and the retainer.




2. Press out the input shaft bearing race using the 87 90 800. Use the 87 92 236 as a base for the pressing operation.




3. Press out the output shaft bearing race using the 87 91 311.




4. Remove the transaxle vent filter from the case using a punch. Drive the vent from the outside to the inside.