Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2009 >> xD L4-1.8L (2ZR-FE) >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








EXTERIOR: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER COVER





(a) Engage the 6 claws and install the front bumper cover.





(b) Install the 5 clips.
(c) Tighten the 8 screws.





(d) Install the pin hold clip.
NOTICE: Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertically.
HINT: Use the same procedure for the RH side and LH side.

(e) Install the clip.
HINT: Use the same procedure for the RH side and LH side.

2. PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT Adjustments
3. PREPARE FOR HEADLIGHT AIMING (for Using a Tester) Adjustments
4. PREPARE FOR HEADLIGHT AIMING (for Using a Screen) Adjustments
5. INSPECT HEADLIGHT AIMING Adjustments
6. ADJUST HEADLIGHT AIMING Adjustments
pro multis · About Operation CHARM