Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2010 >> tC L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





2AZ-FE CHARGING: GENERATOR: INSTALLATION

1. INSTALL GENERATOR ASSEMBLY





(a) Install the wire harness clamp bracket with the bolt.

Torque : 8.4 Nm (85 kgf-cm, 74 in-lbf)





(b) Confirm that the wire harness of the crankshaft position sensor is secured to the wire harness clamp bracket through the back of the rib of the timing chain cover.





(c) Install the generator with the 2 bolts.

Torque : 21 Nm (215 kgf-cm, 16 ft-lbf for bolt A)

Torque : 52 Nm (530 kgf-cm, 38 ft-lbf for bolt B)





(d) Install the 2 wire harness clamps.

(e) Connect the generator wire with the nut.

Torque : 9.8 Nm (100 kgf-cm, 7 ft-lbf)

(f) Install the terminal cap.

(g) Connect the generator connector.

2. INSTALL FAN & GENERATOR V BELT Installation

3. INSTALL FRONT FENDER APRON SEAL RH





(a) Install the apron seal with the 3 clips and 2 screws.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

pro multis · About Operation CHARM