Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2010 >> tC L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Relay >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter Relay: Testing and Inspection





2AZ-FE STARTING: STARTER RELAY: ON-VEHICLE INSPECTION

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STARTER RELAY (Marking: ST)

(a) Remove the engine room No. 2 relay box cover.

(b) Remove the starter relay.

3. INSPECT STARTER RELAY





(a) Measure the resistance of the relay.

Standard resistance:





(b) If the resistance is not as specified, replace the relay.

4. INSTALL STARTER RELAY (Marking: ST)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

pro multis · About Operation CHARM