Disassembly

BRAKE: REAR BRAKE: DISASSEMBLY

1. REMOVE REAR DISC BRAKE PISTON





(a) Using SST, remove the piston by turning it counterclockwise.

SST : 09960-10010

09963-00400

NOTICE:
* Do not damage the piston.
* Do not spatter the brake fluid.
2. REMOVE CYLINDER BOOT

(a) Remove the cylinder boot from the piston.

3. REMOVE PISTON SEAL





(a) Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the disc brake cylinder.

NOTICE:
Do not damage the inner surface or piston seal groove of the cylinder.

4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

5. REMOVE REAR DISC BRAKE BLEEDER PLUG