Installation

SEAT: REAR SEAT ASSEMBLY: INSTALLATION

1. INSTALL REAR SEAT ASSEMBLY

(a) Place the rear seat assembly in the cabin.

NOTICE:
Be careful not to damage the vehicle body.

(b) Insert the 2 locating pins through the 2 body holes and install the rear seat assembly.





(c) Install the 6 bolts in the sequence shown in the illustration.

Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

(d) Engage the 2 front hooks and install the rear seat cushion.





HINT
Confirm that the seat cushion is firmly installed.

2. INSTALL QUARTER TRIM REAR PANEL ASSEMBLY LH

(a) Engage the 2 claws, 2 clips and guide, then install the quarter trim rear panel assembly LH.

3. REMOVE QUARTER TRIM REAR PANEL ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

4. INSTALL REAR SEAT HEADREST ASSEMBLY

(a) Install the 2 rear seat headrest assembly to the rear seatback assembly.

5. INSTALL BOX ASSEMBLY

(a) Set the box assembly and lock the 2 knobs.

(b) Pull down the deck board assembly.