Disassembly

HEATING / AIR CONDITIONING: COMPRESSOR: DISASSEMBLY

1. REMOVE COOLER COMPRESSOR BRACKET

(a) Disconnect the ground wire clamp.





(b) Remove the 2 connector.

(c) Remove the screw and the cooler compressor bracket.





2. REMOVE MAGNET CLUTCH ASSEMBLY

(a) Clamp the cooler compressor in a vise.





Text in Illustration





(b) Using SST, hold the magnet clutch hub.

SST : 09985-00270

(c) Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT
There is no set number of magnet clutch washers since they are used for adjusting.

(d) Using a snap ring expander, remove the snap ring and the magnet clutch rotor.





NOTICE:
Do not damage the seal cover of the bearing when removing the snap ring.

(e) Using a snap ring expander, remove the snap ring and magnet clutch stator.