Installation

2AR-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL FAN AND GENERATOR V BELT

(a) Set the V belt onto each part as shown in the illustration, except the water pump pulley.





Text in Illustration





(b) Loosen the V belt by turning the belt tensioner clockwise.

(c) Set the V belt onto the water pump pulley.

NOTICE:
Make sure that the belt is attached to each pulley. In particular, make sure that the belt is securely fitted into the grooves of the crankshaft pulley.

2. INSTALL REAR ENGINE UNDER COVER RH

(a) Install the under cover RH with the 5 clips.

3. CONNECT FRONT FENDER LINER RH

(a) Connect the front fender liner with the 2 screws and clip.