Removal
2AR-FE INTAKE / EXHAUST: INTAKE AIR CONTROL VALVE ACTUATOR: REMOVAL
1. REMOVE INTAKE MANIFOLD
Removal
2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)
(a) Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.
NOTICE:
* Make sure that foreign matter, such as water, oil, sand and iron particles, does not enter the gear chamber or actuator at the locations marked by the circles in the illustration.
* Do not loosen or remove the bolt and 2 nuts shown in the illustration.
