Removal

AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: REMOVAL; 2013 MY FR-S [03/2012 -]

1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

Removal

2. REMOVE EXHAUST TAIL PIPE ASSEMBLY Removal

3. REMOVE REAR STABILIZER BAR

Removal

4. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, remove the rear No. 1 differential mount cushion.

SST : 09570-18021

09571-01091

09571-01101

09571-01111









NOTICE:
* Make sure that SST does not come into contact with the cylindrical part of the rear suspension member and is not set at an angle.
* Make sure that SST does not run on the weld bead around the cylindrical part.
* Make sure to tie the string of SST to the rear suspension member to prevent SST from dropping.
* Apply a light coat of molybdenum grease to the SST bolt.
* Equally tighten the upper side bolt and lower side bolt.

5. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION

SST : 09570-18011

09571-01011

09571-01021

09571-01091

(a) Using SST, remove the rear No. 2 differential mount cushion.

SST : 09570-18011

09571-01011

09571-01021









NOTICE:
* Make sure that SST does not come into contact with the cylindrical part of the rear suspension member and is not set at an angle.
* Make sure that SST does not run on the weld bead around the cylindrical part.
* Make sure to tie the string of SST to the rear suspension member to prevent SST from dropping.
* Apply a light coat of molybdenum grease to the bolt.