Removal

DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY: REMOVAL; 2013 MY FR-S [03/2012 -]

1. REMOVE CENTER EXHAUST PIPE ASSEMBLY

Removal

2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

(a) Place matchmarks on the differential companion flange and flexible coupling.









(b) Remove the 4 nuts, 4 bolts and 4 washers.

(c) Remove the 2 bolts.





(d) Disconnect the center support bearing.

(e) Remove the front propeller shaft with the center bearing assembly.

(f) Insert SST in the transmission to prevent oil leaks. (for Manual Transmission)





NOTICE:
Be careful not to damage the oil seal.

SST : 09325-20010

(g) Insert SST in the transmission to prevent oil leaks. (for Automatic Transmission)





NOTICE:
Be careful not to damage the oil seal.

SST : 09325-40010