Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR: REMOVAL; 2013 MY FR-S [03/2012 -]

HINT
Use the same procedure for both the RH and LH sides.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

2. REMOVE DOOR ARMREST COVER Front Door Disassembly

3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Front Door Disassembly

4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Front Door Disassembly

5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Front Door Disassembly

6. REMOVE FRONT DOOR SERVICE HOLE COVER Front Door Disassembly

7. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Front Door Disassembly

8. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY Front Door Disassembly

9. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY Front Door Disassembly

10. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using a T25 "TORX" socket wrench, remove the 3 screws and the power window regulator motor assembly.