Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Wheels: Testing and Inspection
WHEEL BALANCING1) Using the wheel balancer, measure wheel balance.
2) Adjust the wheel balancing.
NOTE:
^ Unbalance after adjusting the wheel balancing should be 5 g (0.18 oz) or less.
^ When using the adhesive type weight, degrease the surface where the adhesive type weight will be applied securely.
^ After applying the adhesive type weight, apply a force to the weight and attain full adhesion.
^ Using the knock-on type weight, check the size of the knock-on part.
Service limit A:
Knock-on type weight for steel wheel:
2.0 mm (0.079 in)
Knock-on type weight for aluminum wheel:
5.0 mm (0.197 in)