Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2009 >> Equator 2WD L4-2.5L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Programming and Relearning >> Procedure After Replacing ECM
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Procedure After Replacing ECM

Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.
1. Perform initialization of immobilizer system and registration of all immobilizer system ignition key IDs. Refer to [ECM Re-Communicating Function: Special Repair Requirement]. ECM Re-Communicating Function: Special Repair Requirement
2. Perform "VIN Registration" [Procedure After Replacing ECM].
3. Perform "Accelerator Pedal Released Position Learning" [Procedure After Replacing ECM].
4. Perform "Throttle Valve Closed Position Learning" [Procedure After Replacing ECM].
5. Perform "Idle Air Volume Learning" [Procedure After Replacing ECM].
pro multis · About Operation CHARM