P0009

DTC P0008 / P0009

NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank:N32A.

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Make sure that the following conditions are satisfied when using this procedure.
- -10 �C (14 �F) < ECT < 110.3 �C (230.5 �F)

1. Start engine and warm up to normal operating temperature.
2. Run engine at idle speed for 3 min.

DTC Troubleshooting

Step 1-5: