P0017

DTC P0016 / P0017 / P0018 / P0019

NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank:N32A.

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Check to make sure that the following conditions are satisfied when using this procedure.
- -10 °C (14 °F) < ECT < 110 °C (230 °F)

1. Start engine and warm up to normal operating temperature.
2. Run engine at idle speed for 3 min.

DTC Troubleshooting

Step 1-5: