P0150

DTC P0130 / P0150

NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank:N32A.

DTC Detecting Condition and Trouble Area






Wiring Diagram

Wiring Diagram:

DTC Confirmation Procedure

NOTE:
Check to make sure that the following conditions are satisfied when using this procedure.
- Battery voltage > 10.5 V

1. Start engine and warm up to normal operating temperature.
2. Run engine at idle speed for 5 min.
3. Drive vehicle at 60 - 80 km/h (37 - 50 mile/h) for 3 min. (Keep throttle valve opening constant in this step.)

DTC Troubleshooting

Step 1-5: