P0506
DTC P0506 / P0507 / P050A / P050BDTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
P0506 / P0507
NOTE:
Make sure that the following conditions are satisfied when using this procedure.
- ECT > 10.5 °C (13.1 °F)
- IAT > 10.5 °C (13.1 °F)
- BARO > 70 kPa (525 mmHg, 20.7 inHg, 0.7 bar) (Altitude: lower than 3,000 m (9,842 ft))
1. Start engine and warm up to normal operating temperature.
2. Run engine at idle speed for 1 min.
P050A
NOTE:
Make sure that the following conditions are satisfied when using this procedure.
- ECT at engine starting < 60 °C (140 °F)
- BARO > 70 kPa (525 mmHg, 20.7 inHg, 0.7 bar) (Altitude: lower than 3,000 m (9,842 ft))
1. Run engine at idle speed for 1 min.
P050B
NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Make sure that the following conditions are satisfied when using this procedure.
- -10.5 °C (13.1 °F) < ECT at engine starting < 60 °C (140 °F)
- Difference between IAT and ECT at engine starting < 15 °C (59 °F)
- BARO > 70 kPa (525 mmHg, 20.7 inHg, 0.7 bar) (Altitude: lower than 3,000 m (9,842 ft))
1. Run engine at idle speed for 1 min.
DTC Troubleshooting
