Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2011 >> SX4 2WD L4-2.0L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor >> Service and Repair >> Windshield Wiper Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Wiper Removal and Installation




Windshield Wiper Removal and Installation

Removal

1) Disconnect negative (-) cable at battery.
2) Remove wiper pivot caps (1) and wiper arm nuts (2), and remove windshield wiper arms with wiper blades (3).





3) Remove cowl top garnish referring to Service and Repair Cowl Top and Front Lower Cross Member Components.
4) Disconnect coupler from windshield wiper motor.
5) Remove bolts (1), and remove windshield wiper assembly (2).






Installation

1) Install windshield wiper assembly (1), and tighten bolts to specified torque in order of "i", "ii" and "iii" indicated in figure.

Tightening torque
Windshield wiper bolt (a): 8 Nm (0.8 kgf-m, 6.0 lbf-ft)





2) Connect coupler to windshield wiper motor.
3) Install cowl top garnish referring to Service and Repair Cowl Top and Front Lower Cross Member Components.
4) Install windshield wiper arms with wiper blades (1) to specified position as shown in figure, and then tighten windshield wiper nuts to specified torque.

Tightening torque
Windshield wiper arm nut (a): 20 Nm (2.0 kgf-m, 14.5 lbf-ft)

5) Install wiper pivot caps (2) to windshield wiper arm nuts.











6) Connect negative (-) cable to battery.

pro multis · About Operation CHARM