A/C Control Assembly

ADJUSTMENT







1. SET A/C CONTROL LEVERS IN THESE CONDITIONS:
a. Air inlet control lever to "FRESH" position
b. Mode control lever to "FACE" position
c. Temperature control lever to "COOL" position

2. ADJUST AIR INLET CONTROL CABLE
Set the air inlet damper on "FRESH" position and install the control cable and lock the clamp.







3. ADJUST MODE CONTROL CABLE
Set the mode damper on "FACE" position and install the control cable and lock the clamp.







4. ADJUST AIR MIX CONTROL CABLE
Set the air mix damper on "COOL" position and install the control cable and lock the clamp.







5. ADJUST WATER VALVE CONTROL CABLE
Set the water valve on "COOL" position, install the control cable and lock the clamp.