Removal

3UR-FE FUEL: FUEL INJECTOR: REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE
(a) Discharge the fuel system pressure Service Precautions.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE AIR CLEANER HOSE ASSEMBLY Removal

5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

(a) Remove the No. 1 engine cover sub-assembly.
6. REMOVE NO. 3 ENGINE COVER

(a) Remove the No. 3 engine cover.
7. DISCONNECT NO. 2 FUEL TUBE

(a) Disconnect the No. 2 fuel tube from the fuel pressure regulator Service Precautions.
8. DISCONNECT NO. 1 FUEL TUBE

(a) RH Side:
Disconnect the No. 1 fuel tube from the fuel delivery pipe RH Service Precautions.

(b) LH Side:
Disconnect the No. 1 fuel tube from the fuel delivery pipe LH Service Precautions.
9. DISCONNECT NO. 1 FUEL HOSE

(a) Disconnect the fuel hose from the fuel delivery pipe LH Service Precautions.
10. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH

(a) Disconnect the ventilation hose and No. 6 wire harness connector.

(b) Remove the 2 bolts and fuel delivery pipe RH.
NOTE: When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

(c) Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head RH.
11. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH
(a) Disconnect the No. 7 wire harness connector.

(b) Remove the 2 bolts and fuel delivery pipe LH.
NOTE: When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

(c) Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head LH.
12. REMOVE FUEL INJECTOR ASSEMBLY
(a) Remove the fuel injector from the fuel delivery pipe, and then disconnect the injector connector.

NOTE: For reinstallation, attach a tag or label to the injector shaft.

(b) Remove the O-ring from the fuel injector.

(d) Detach the 3 clamps and then remove the No. 7 wire harness from the delivery pipe LH.