Removal

3UR-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL

REMOVAL

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal

4. DRAIN ENGINE COOLANT Service and Repair

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE AIR CLEANER HOSE ASSEMBLY Removal

7. REMOVE THROTTLE BODY ASSEMBLY






(a) Disconnect the 2 water by-pass hoses.
(b) Disconnect the throttle position sensor and control motor connector.






(c) Remove the 4 bolts, throttle body and gasket.
(d) Remove the 2 water by-pass hoses from the throttle body.