Removal

LIGHTING: IGNITION KEY CYLINDER LIGHT: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH
HINT: Use the same procedure as for the RH side Removal.

2. REMOVE FRONT FLOOR FOOTREST Removal
3. REMOVE FOOTREST CLIP Removal
4. REMOVE COWL SIDE TRIM BOARD LH
HINT: Use the same procedure as for the RH side Removal.

5. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side Removal.

6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal





8. REMOVE INSTRUMENT PANEL FINISH PLATE
(a) Using a screwdriver with its tip wrapped in protective tape, remove the instrument panel finish plate.





9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
(a) Remove the 2 bolts.
(b) Disengage the claw and 5 clips and remove the lower instrument panel finish panel.





10. REMOVE TRANSPONDER KEY AMPLIFIER
(a) Disconnect the connector.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the transponder key amplifier.