Removal

1GR-FE CHARGING: GENERATOR: REMOVAL

REMOVAL

1. REMOVE BATTERY
2. REMOVE V-BANK COVER Removal
3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal
4. REMOVE FAN AND GENERATOR V BELT Removal
5. REMOVE GENERATOR ASSEMBLY

(a) Disconnect the wire harness.
(1) Remove the bolt and wire harness stay.
(2) Disconnect the connector from the generator assembly.

(3) Remove the terminal cap and nut.
(4) Disconnect the wire harness from terminal B.

(b) Remove the 2 bolts, then separate the wire harness clamp bracket from the generator assembly.