Removal

2GR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE AIR CLEANER CAP Removal
3. REMOVE AIR CLEANER CASE Removal
4. REMOVE ECM





(a) Remove the 3 bolts of the ECM bracket.





(b) Disconnect the 2 ECM connectors.
NOTE: After disconnecting the connector, make sure that dirt, water and other foreign matter does not contact the connecting part of the connector.
(1) Raise the 2 levers while pushing the locks on the 2 levers, and disconnect the 2 ECM connectors.
(c) Remove the ECM with bracket.





(d) Remove the 4 screws and 2 ECM brackets.