CD cannot be Inserted / Played or CD is Ejected Right After Insertion

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: CD cannot be Inserted / Played or CD is Ejected Right After Insertion

CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED
(a) Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.
OK:
Normal CD.

HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- CDs with adhesive paper labels should not be played.
- Commercial audio CDs can be played.
- CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
- MP3 and WMA files on CD-ROMs, CD-Rs, and CD-RWs can be played.

NG -- CHANGE DISC
OK -- Continue to next step.

2. CHECK THAT CD IS INSERTED PROPERLY
(a) Check whether or not the CD is inserted upside down.
OK:
CD is properly inserted.

NG -- INSERT CD PROPERLY
OK -- Continue to next step.

3. CHECK CD





(a) Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.
OK:
Malfunction disappears.

NOTE: Do not use a conventional record cleaner or antistatic preservative.

NG -- REPLACE CD WITH ANOTHER AND RECHECK
OK -- END
4. REPLACE CD WITH ANOTHER AND RECHECK
(a) Replace the CD with a normal one and check that the malfunction disappears.
OK:
Malfunction disappears.

NG -- REPLACE RADIO RECEIVER ASSEMBLY
OK -- END