Removal

ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE HOOD LOCK CONTROL CABLE COVER





(a) Remove the screw.
(b) Remove the cap and nut.
(c) Detach the clamp and remove the cable cover.
2. REMOVE HOOD LOCK ASSEMBLY





(a) Remove the cap.
(b) Remove the 2 bolts and nut.
(c) Remove the hood lock.
(d) w/ Theft Deterrent System:
(1) Disconnect the hood lock control cable.
3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY





(a) Detach the 2 claws.
(b) Disconnect the hood lock control cable and remove the hood lock lever.
4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY





(a) Using a screwdriver, detach the cable from the clamps shown in the illustration.
HINT: Tape the screwdriver tip before use.

(b) Pull the cable from the engine room and remove it.