Disposal

SUSPENSION: FRONT SHOCK ABSORBER: DISPOSAL

DISPOSAL

1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH
(a) Fully extend the shock absorber rod.





(b) Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
CAUTION:
- Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
- For off road type shock absorbers, be extremely careful when drilling it as its gas pressure is much higher than the standard type.
NOTE: The gas is colorless, odorless and nonpoisonous.