Vehicle Stability Control System
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DIAGNOSTIC TROUBLE CODE CHART
HINT
* If no abnormality is found when inspecting parts, inspect the skid control ECU and ground points for poor connections.
* If a trouble code is output during the DTC check, check the circuit indicated by the DTC. For the respective "DTC Code" in the DTC chart.
* When 2 or more DTCs are output, perform circuit inspections one by one until the problem is identified.
* For DTCs output by the warning light or indicator light, refer to the DTC charts in DTC Check/Clear.
* Inspect the fuses and relays before inspecting the trouble areas shown in the table below.
