Removal

SUSPENSION CONTROL: STABILIZER CONTROL ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Remove the lower No. 1 instrument panel airbag assembly Removal.

3. REMOVE STABILIZER CONTROL ECU





(a) Disconnect the connector.

(b) Remove the bolt and stabilizer control ECU.

NOTICE:
* Avoid any impact to the stabilizer control ECU.
* Replace the stabilizer control ECU with a new one if it is dropped.