Television Display Power Source Circuit

AUDIO / VISUAL: REAR SEAT ENTERTAINMENT SYSTEM: Television Display Power Source Circuit
- Television Display Power Source Circuit

DESCRIPTION

This is the power source circuit of the television display assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - BATTERY, BODY GROUND)

(a) Disconnect the television display assembly connector.





(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:





(c) Measure the voltage according to the value(s) in the table below.

Standard voltage:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table