Removal

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE SERVICE PLUG GRIP Removal

3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal

4. REMOVE FRONT DOOR SCUFF PLATE LH Removal

5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

7. REMOVE FRONT DOOR SCUFF PLATE RH Removal

8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

10. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

12. REMOVE NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System) Removal

13. REMOVE LOWER REAR CONSOLE BOX Removal

14. REMOVE CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System) Removal

15. REMOVE CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System) Removal

16. REMOVE FRONT NO. 1 CONSOLE BOX INSERT Removal

17. REMOVE FRONT NO. 2 CONSOLE BOX INSERT Removal

18. REMOVE YAW RATE AND ACCELERATION SENSOR

(a) Disconnect the connector from the yaw rate and acceleration sensor.





(b) Remove the 2 bolts and yaw rate and acceleration sensor.





NOTICE:
Do not remove the nuts.