Installation

SUPPLEMENTAL RESTRAINT SYSTEM: OCCUPANT CLASSIFICATION ECU: INSTALLATION

1. INSTALL OCCUPANT CLASSIFICATION ECU

(a) Install the occupant classification ECU with the claw.





NOTICE:
* If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant classification ECU with a new one.
* When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with other parts and that it is not pinched between other parts.
(b) Connect the 2 connectors.

2. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

3. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (for Manual Seat) Installation

4. INSTALL REAR SEAT TRACK COVER RH (for Manual Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

5. INSTALL FRONT INNER SEAT TRACK COVER RH (for Manual Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

6. INSTALL FRONT OUTER SEAT TRACK COVER RH (for Manual Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

7. INSTALL FRONT SEAT HEADREST ASSEMBLY RH (for Manual Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

8. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

9. INSTALL REAR INNER SEAT TRACK COVER RH (for Power Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

10. INSTALL REAR OUTER SEAT TRACK COVER RH (for Power Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

11. INSTALL FRONT INNER SEAT TRACK COVER RH (for Power Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

12. INSTALL FRONT OUTER SEAT TRACK COVER RH (for Power Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

13. INSTALL FRONT SEAT HEADREST ASSEMBLY RH (for Power Seat)

HINT
Use the same procedure for the RH side and the LH side Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Manual Seat)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

15. INSPECT FRONT SEAT ASSEMBLY (for Manual Seat) Installation

16. INSPECT FRONT SEAT ASSEMBLY (for Power Seat) Installation

17. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.