Installation

SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): INSTALLATION

HINT
* Use the same procedure for the LH side and RH side.
* The procedure listed below is for the LH side.
1. INSTALL FRONT SEAT ASSEMBLY LH

(a) Install the front seat.

NOTICE:
Be careful not to damage the vehicle body.

(b) Connect the seat wire connectors under the seat.

(c) Operate the seat track adjusting handle to move the seat to the rearmost position.

(d) Install the 2 bolts.





Torque : 37 Nm (374 kgf-cm, 27 ft-lbf)

(e) Operate the seat track adjusting handle to move the seat to the foremost position.

(f) Install the 2 bolts.





Torque : 37 Nm (374 kgf-cm, 27 ft-lbf)

2. INSTALL SEAT TRACK COVER LH

(a) Engage the 2 claws to install the seat track cover.





3. INSTALL SEAT TRACK COVER INNER LH

(a) Engage the 2 claws to install the seat track cover.





4. INSTALL FRONT SEAT HEADREST ASSEMBLY

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

6. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.