Removal

1UR-FE BATTERY / CHARGING: GENERATOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FAN AND GENERATOR V BELT

(a) Remove the fan and generator V belt Removal.

3. REMOVE AIR CLEANER ASSEMBLY Removal

4. REMOVE FRONT FENDER APRON SEAL RH Removal

5. DISCONNECT POWER STEERING OIL PRESSURE SWITCH CONNECTOR Removal

6. DISCONNECT SOLENOID VALVE CONNECTOR Removal

7. DISCONNECT VANE PUMP ASSEMBLY Removal

8. REMOVE GENERATOR ASSEMBLY

(a) Remove the terminal cap.





(b) Disconnect the generator connector.

(c) Remove the nut and disconnect the generator wire.

(d) Remove the bolt and disconnect the wire harness bracket from the generator.

(e) Remove the 3 bolts, nut and generator.