Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR: REMOVAL

HINT
* Use the same procedure for both the RH and LH sides.
* The procedure described below is for the RH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE REAR DOOR FRAME GARNISH Disassembly

3. REMOVE REAR DOOR ARMREST BASE UPPER PANEL Disassembly

4. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG Disassembly

5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

6. REMOVE REAR DOOR TRIM NO. 2 BRACKET Disassembly

7. REMOVE REAR DOOR SERVICE HOLE COVER Disassembly

8. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING

HINT
Use the same procedure as for the LH side .

9. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP

HINT
Use the same procedure as for the LH side .

10. REMOVE REAR DOOR GLASS RUN Disassembly

11. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY Disassembly

12. REMOVE REAR DOOR WINDOW FRONT GUIDE SUB-ASSEMBLY Disassembly

13. REMOVE REAR DOOR GLASS SUB-ASSEMBLY Disassembly

14. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY Disassembly

15. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using "TORX" socket wrench T25, remove the 3 screws and the power window regulator motor.