Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

HINT
Installation is in the reverse order of removal.

The procedure described below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)

(a) Remove the front seat assembly Removal.

3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)

(a) Remove the front seat assembly Removal.

4. REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat) Disassembly

5. REMOVE SEAT POSITION AIRBAG SENSOR (for Manual Seat)

(a) Disconnect the connector from the seat position airbag sensor.





(b) Using "TORX" socket wrench T30, remove the "TORX" screw and the seat position airbag sensor.

(c) Remove the seat slide position sensor protector from the seat position airbag sensor.

6. REMOVE SEAT POSITION AIRBAG SENSOR (for Power Seat)

(a) Disconnect the connector from the seat position airbag sensor.





(b) Using "TORX" socket wrench T30, remove the "TORX" screw and the seat position airbag sensor.

(c) Remove the seat slide position sensor protector from the seat position airbag sensor.