Outer Rear View Mirror

MIRROR: OUTER REAR VIEW MIRROR: INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Memory)

(a) Disconnect the mirror connector.

(1) Check operation of the outer mirror.





(2) Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (LH):





(3) If the result is not as specified, replace the mirror assembly.

2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Memory)

(a) Disconnect the mirror connector.

(b) Check operation of the outer mirror.





(1) Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.

Standard (RH):





(2) If the result is not as specified, replace the mirror assembly.

3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Memory)

(a) Disconnect the mirror connector.

(b) Check operation of the outer mirror.





(1) Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.





(2) If the result is not as specified, replace the mirror assembly.

(c) Check operation of the EC mirror.





(1) Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.





(2) If the result is not as specified, replace the mirror assembly.

(d) Check of the retract function.





(1) Apply battery voltage and inspect operation of the mirror, as shown in the table and illustration.





(2) If the result is not as specified, replace the mirror assembly.

4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Memory)

(a) Disconnect the mirror connector.

(b) Check operation of the outer mirror.





(1) Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.





(2) If the result is not as specified, replace the mirror assembly.

(c) Check operation of the EC mirror.





(1) Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.





(2) If the result is not as specified, replace the mirror assembly.

(d) Check of the retract function.





(1) Apply battery voltage and inspect operation of the mirror, as shown in the table and illustration.





(2) If the result is not as specified, replace the mirror assembly.