Removal

1GR-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. DRAIN ENGINE COOLANT Service and Repair

3. REMOVE V-BANK COVER





(a) Remove the 2 nuts, then remove the V-bank cover.

4. REMOVE AIR CLEANER ASSEMBLY





(a) Disconnect the ventilation hose No. 2.

(b) Disconnect the vacuum hose.





(c) Disconnect the mass air flow meter connector.

(d) Remove the 2 wire harness clamps.

(e) Loosen the 2 hose clamps.





(f) Remove the 2 bolts, then remove the air cleaner.

5. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY





(a) Disconnect the water by-pass hose No. 5.

(b) Disconnect the water by-pass hose No. 4.





(c) Disconnect the throttle motor connector.





(d) Remove the 4 bolts, then remove the throttle w/ motor body and gasket.