Vehicle Position Mark is not Updated

NAVIGATION: NAVIGATION SYSTEM (w/o USB Audio System): Vehicle Position Mark is not Updated
- Vehicle Position Mark is not Updated

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISC

(a) Check that the map disc is not deformed or cracked.





OK:

No deformations or cracks on map disc.

NG -- REPLACE MAP DISC
OK -- Continue to next step.

2. CHECK NAVIGATION DISPLAY

(a) Check if a touch scroll can be performed on the map display.

OK:

Touch scroll can be performed.

Result





C -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal

B -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal
A -- Continue to next step.

3. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)

(a) Enter the "Navigation Check" mode and select "Vehicle Sensors" Operation Check.





(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are equal or almost equal.

OK:

The readings are equal or almost equal.

NG -- GO TO "SPEED SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

OK -- END