VSC OFF Indicator Light Does Not Come ON

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: VSC OFF Indicator Light does not Come ON
- VSC OFF Indicator Light does not Come ON

DESCRIPTION

Refer to the description of "VSC OFF Indicator Light Remains ON" VSC OFF Indicator Light Remains ON.

WIRING DIAGRAM

Refer to the VSC OFF indicator light circuit VSC OFF Indicator Light Remains ON.

INSPECTION PROCEDURE

NOTICE:
When replacing the brake actuator assembly, perform the zero point calibration Calibration.

PROCEDURE

1. INSPECT CAN COMMUNICATION SYSTEM

(a) Check if a CAN communication system DTC is output How to Proceed With Troubleshooting.

Result:





B -- REPAIR CAN COMMUNICATION SYSTEM CAN Communication System
A -- Continue to next step.

2. PERFORM ACTIVE TEST USING TECHSTREAM (VSC OFF INDICATOR LIGHT)

(a) Connect the Techstream to the DLC3.

(b) Start the engine.

(c) Select the Active Test mode on the Techstream Data List / Active Test.

ABS/VSC/TRAC:





OK:

The VSC OFF indicator light turns on or off.

OK -- REPLACE BRAKE ACTUATOR ASSEMBLY Removal
NG -- Continue to next step.

3. INSPECT COMBINATION METER ASSEMBLY

(a) Inspect the combination meter How To Proceed With Troubleshooting.

NG -- REPLACE COMBINATION METER ASSEMBLY Removal

OK -- REPLACE BRAKE ACTUATOR ASSEMBLY Removal