Meter / Gauge System

METER: METER / GAUGE SYSTEM: TERMINALS OF ECU

1. CHECK COMBINATION METER ASSEMBLY (METER ECU)





(a) Disconnect the E19 meter connector.

(b) Measure the voltage and resistance of the wire harness side connector.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the E19 meter connector.

(d) Measure the voltage of the connector.









*: w/ Smart Key System

If the result is not as specified, the combination meter may be malfunctioning.













Table of terminal connection