Removal

LIGHTING: ROOM LIGHT ASSEMBLY (for Front): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE MAP LIGHT ASSEMBLY





(a) Detach the 4 clips and remove the map light.

(b) Disconnect the light connector.

3. REMOVE MAP LIGHT LENS





(a) Using a screwdriver, pry out the 8 claws and remove the map light lens.

HINT
Tape the screwdriver tip before use.