Removal

2GR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE AIR CLEANER CAP Removal

3. REMOVE AIR CLEANER CASE Removal

4. REMOVE ECM

(a) Remove the 3 bolts of the ECM bracket.





(b) Disconnect the 2 ECM connectors.





NOTICE:
After disconnecting the connector, make sure that dirt, water and other foreign matter does not contact the connecting part of the connector.

(1) Raise the 2 levers while pushing the locks on the 2 levers, and disconnect the 2 ECM connectors.

(c) Remove the ECM with bracket.

(d) Remove the 4 screws and 2 ECM brackets.