Removal

AUDIO / VISUAL: RADIO RECEIVER: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER Removal

4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER Removal

5. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

(a) for Not Standard Type:

(1) Remove the 4 bolts.

(2) Pull the radio receiver assembly to detach the 2 claws and 4 clips on the backside of the radio receiver assembly.

(3) Disconnect all the connectors and remove the radio receiver assembly with bracket.

(b) for Standard Type:

(1) Remove the 4 bolts.

(b) Pull the radio and display receiver assembly to detach the 2 claws and 4 clips on the backside of the radio and display receiver assembly.

(c) Disconnect all the connectors and remove the radio and display receiver assembly with bracket.

(d) for Not Standard Type:

7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

(a) Detach the 4 claws and remove the instrument cluster finish panel.

8. REMOVE NO. 1 RADIO BRACKET

(a) for Not-standard Type:

(1) Remove the 4 bolts and No. 1 radio bracket from the radio receiver assembly.

(b) for Standard Type:

(1) Remove the 4 bolts and No. 1 radio bracket from the radio receiver assembly.

(c) for Radio and display Type:

(1) Remove the 4 bolts and No. 1 radio bracket from the radio and display receiver assembly.

9. REMOVE NO. 2 RADIO BRACKET

(a) for Not-standard Type:

(1) Remove the 4 bolts and No. 2 radio bracket from the radio receiver assembly.

(b) for Standard Type:

(1) Remove the 4 bolts and No. 2 radio bracket from the radio receiver assembly.

(c) for Radio and display Type:

(1) Remove the 4 bolts and No. 2 radio bracket from the radio and display receiver assembly.