Removal

DOOR LOCK: TRANSMITTER BATTERY (w/o Smart Key System): REMOVAL

1. REMOVE TRANSMITTER HOUSING COVER

NOTICE:
Take extra care when handling these precision electronic components.





(a) Twist the screwdriver in the direction of the arrow mark in the illustration, and open the transmitter housing cover.

NOTICE:
Do not forcibly pry the cover.

HINT
Tape the screwdriver tip before use.

2. REMOVE DOOR CONTROL TRANSMITTER MODULE

(a) Using a precision screwdriver, remove the door control transmitter module.





NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

HINT
Tape the screwdriver tip before use.

3. REMOVE TRANSMITTER BATTERY

(a) Twist the coin in the direction of the arrow mark in illustration, and remove the transmitter battery's cover.





NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

(b) Remove the battery (lithium battery: CR2016).





NOTICE:
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
* Do not push the terminals with your finger.
* Do not forcibly pry up the battery. The terminals may become damaged.
* Do not touch the battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter. It may cease to work.