Installation

EXTERIOR: REAR SPOILER: INSTALLATION

HINT
* When installing the spoiler, heat the vehicle body and spoiler using a heat light.

Standard heating temperature:





NOTICE:
Do not heat the body and spoiler excessively.

1. INSTALL CENTER STOP LIGHT

(a) Install the center stop light with the 2 screws.





2. INSTALL REAR SPOILER

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(b) If reusing the spoiler:

Clean the spoiler.

(1) Using a heat light, heat the spoiler.

(c) Connect the center stop light connector.

(d) Install the spoiler with 3 clips.





(e) Install the 3 bolts.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

3. INSTALL BACK DOOR CENTER GARNISH Reassembly

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL