Removal

2GR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE AIR CLEANER CAP Removal

4. REMOVE AIR CLEANER CASE Removal

5. REMOVE ECM

(a) Remove the 3 bolts of the ECM bracket.





(b) Disconnect the 2 ECM connectors.





NOTICE:
After disconnecting the connector, make sure that dirt, water and other foreign matter does not contact the connecting part of the connector.

(1) Raise the 2 levers while pushing the locks on the 2 levers, and disconnect the 2 ECM connectors.

(c) Remove the ECM with bracket.

(d) Remove the 4 screws and 2 ECM brackets.