Alternator Bearing: Service and Repair

REPLACING FRONT BEARING







1. Remove the 4 screws, bearing retainer and bearing.







2. Using a socket wrench and press, press out the bearing.







3. Using SST and a press, press in a new bearing.
SST 09950-60010 (09951-00280)

4. Install the bearing retainer with the 4 screws.

Torque: 2.6 N.m (27 kg.cm, 23 in.lb.)

REPLACING REAR BEARING







1. Using SST, remove the bearing cover (outside) and bearing.
SST 09820-00021

NOTE: Be careful not to damage the fan.

2. Remove the bearing cover (inside).







3. Place the bearing cover (inside) on the rotor.







4. Using SST and a press, press in a new bearing.
SST 09820-00030







5. Using SST. push in the bearing cover (outside).
SST 09285-76010